New member from Nottingham

A forum for new members to introduce themselves to the rabble already onboard. Not compulsory!
Tell us a little about yourself, lie if you have to but keep it to just an introduction, not a car discussion.

Moderator: RichardW

blake7
Posts: 13
Joined: 07 Sep 2019, 17:33
x 2

New member from Nottingham

Post by blake7 » 07 Sep 2019, 18:35

Hi all,

Recently bought a Nemo van with a few issues. So far I have fixed the electric windows by replacing the drivers side switch with a new one off good old evilbay, I also replaced the blower as it was not working.

Also looking to do a timing belt change and service as I have no record of when it was last done.

I only have one key and I'm currently reading through threads about using Lexia 3 to see if it will program a new key that I have.

The joys of buying old cars/vans hey :-D

User avatar
GiveMeABreak
Forum Admin Team
Posts: 15834
Joined: 15 Sep 2015, 19:38
x 1471

Re: New member from Nottingham

Post by GiveMeABreak » 07 Sep 2019, 18:44

Hi and welcome.

Be aware that for a Nemo (which is a Fiat essentially) will require the S1279 module that attaches to the Lexia VCI and is required for diagnosing and communicating with certain PSA commercial vehicles - especially the Fiat based ones like this.

This is the additional adapter I'm referring to as an example:

https://www.ebay.co.uk/itm/S1279-module ... 3255120825

Hell Razor5543
NOT Alistair or Simon
Posts: 9305
Joined: 01 Apr 2012, 09:47
x 627

Re: New member from Nottingham

Post by Hell Razor5543 » 07 Sep 2019, 19:05

Hi, and :welc: to the Forum.

blake7
Posts: 13
Joined: 07 Sep 2019, 17:33
x 2

Re: New member from Nottingham

Post by blake7 » 07 Sep 2019, 20:43

GiveMeABreak wrote:
07 Sep 2019, 18:44
Hi and welcome.

Be aware that for a Nemo (which is a Fiat essentially) will require the S1279 module that attaches to the Lexia VCI and is required for diagnosing and communicating with certain PSA commercial vehicles - especially the Fiat based ones like this.

This is the additional adapter I'm referring to as an example:

https://www.ebay.co.uk/itm/S1279-module ... 3255120825
Thanks for the info, I was going to buy the kit:

https://www.easydiagnostics.co.uk/produ ... c-firmware

It says nemo in the description so I assumed it would work?

User avatar
myglaren
Forum Admin Team
Posts: 16055
Joined: 02 Mar 2008, 14:30
x 497

Re: New member from Nottingham

Post by myglaren » 07 Sep 2019, 20:46

Have you brought any crewmates with you?


term190.jpg

User avatar
GiveMeABreak
Forum Admin Team
Posts: 15834
Joined: 15 Sep 2015, 19:38
x 1471

Re: New member from Nottingham

Post by GiveMeABreak » 07 Sep 2019, 22:38

blake7 wrote:
07 Sep 2019, 20:43
GiveMeABreak wrote:
07 Sep 2019, 18:44
Hi and welcome.

Be aware that for a Nemo (which is a Fiat essentially) will require the S1279 module that attaches to the Lexia VCI and is required for diagnosing and communicating with certain PSA commercial vehicles - especially the Fiat based ones like this.

This is the additional adapter I'm referring to as an example:

https://www.ebay.co.uk/itm/S1279-module ... 3255120825
Thanks for the info, I was going to buy the kit:

https://www.easydiagnostics.co.uk/produ ... c-firmware

It says nemo in the description so I assumed it would work?
It may only partially work with a NEMO. The Nemo is classed as a commercial vehicle and has heavy Fiat collaboration - so some systems require the additional interface to read and communicate with some of the ECUs as they are not native to PSA. The seller is recommended by members here (and there is a discount code for members in the link below).

All these models need hte S1279 interface to work correctly:
Peugeout Bipper
Peugeout Boxer III
Peugeout Boxer III minibus
Citroen Nemo
Citroen Jumper III
Citroen Jumper III minibus

https://www.frenchcarforum.co.uk/forum/ ... hp?t=60112

User avatar
GiveMeABreak
Forum Admin Team
Posts: 15834
Joined: 15 Sep 2015, 19:38
x 1471

Re: New member from Nottingham

Post by GiveMeABreak » 07 Sep 2019, 22:58

Oh, and plus 1 for Servalan! Currently working my way through Blake's 7 DVD set again - but can't quite make it to series 4 as I know the Liberator becomes toast at some point and they end up in that Red Dwarf tin can and that ridiculous computer. Bring back Zen (and the Liberator).

User avatar
GiveMeABreak
Forum Admin Team
Posts: 15834
Joined: 15 Sep 2015, 19:38
x 1471

Re: New member from Nottingham

Post by GiveMeABreak » 07 Sep 2019, 23:01

And I wouldn't be surprised if member 'Blake7' thinks we've all lost the plot and are a secret Blake's 7 society!

blake7
Posts: 13
Joined: 07 Sep 2019, 17:33
x 2

Re: New member from Nottingham

Post by blake7 » 07 Sep 2019, 23:22

Thanks for the advice, the seller is away for a few weeks so I will give him a bell when back to see what he says about the nemo.

I use Blake7 a username on many forums and I can safely say I have never had such a reaction to it! :lol:

User avatar
mickthemaverick
donor 2019
Posts: 406
Joined: 11 May 2019, 17:56
x 118

Re: New member from Nottingham

Post by mickthemaverick » 07 Sep 2019, 23:42

Hello and welcome to the club. No quips about Blake7 from me cos I've never been into SciFi, I have enough trouble dealing with the real world!! :)

User avatar
van ordinaire
donor 2017
Posts: 2322
Joined: 23 Jun 2015, 14:45
x 198

Re: New member from Nottingham

Post by van ordinaire » 09 Sep 2019, 22:45

No, SciFi never did much for me but had enough exposure to StarTrick to enable me to appreciate Red Dwarf. ;)